ProxPro Reader: 125 kHz Versatile Proximity Card Reader



5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm)


Polycarbonate UL 94

Power Supply:

10-28.5 VDC; Linear power supplies


Reverse voltage protection included.

Current requirements:

Average: 100 mA (12 VDC)


120 mA (24 VDC)

Operating temperature:

-22 to 150º F (-30ºC to 65ºC)

Operating Humidity:

0-95% relative humidity noncondensing


12 oz. (336 gm)

Transmit Frequency:

125 kHz

Excite Frequency:

125 kHz



mounting holes fit standard U.S.A. single-gang switch boxes (vertically mounted) to simplify installation. Field adjustable for mounting directly to metal, exhibiting only minimal effects on read range. A selectable jumper setting provides for improved performance.

Audiovisual indication:

when a proximity card is presented to the reader, the red LED flashes green and the beeper sounds. The multicolor LED and beeper can also be controlled individually by the host system.


on reader power-up, an internal self-test routine checks and verifies the setup configuration, determines the internal or external control of the LED and beeper, and initializes the reader's operation. An additional external loop-back test allows the reader outputs and inputs to be verified without the use of additional test equipment.

Indoor/Outdoor design:

sealed in a rugged, weatherized polycarbonate enclosure designed to withstand harsh environments, providing reliable performance and a high degree of vandal resistance. Easily installed in any location, even with the optional keypad.

Easily Interfaced:

interfaces with all existing Wiegand protocol access control systems. Output data in Wiegand or Clock and Data format, plus optional RS232 and RS422 serial interfaces.


includes a tamper switch to provide notification of reader tampering. Recognizes card formats up to 85 bits, with over 137 billion unique codes.

Keypad Option:

available with an optional, integrated weatherized keypad, which provides an additional level of security by allowing the use of a personal identification number (PIN). The keypad interfaces with the host system either by sending the keypad data over the data output lines, or via a direct connection to the host keypad interface.

RW300 Reader/Writer611113.56:13.56 MHz EU/Asian Back Box Contactless Smart Card Reader


iCLASS smart reader/writers and cards make access control and read/write applications more powerful, more versatile, and most importantly, offer enhanced security through encryption and mutual authentication. At the same time, iCLASS is user-friendly, delivering the convenience, affordability and reliability of proximity technology, for which HID is known worldwide. Using the 13.56 MHz technology platform, the iCLASS RW300 contactless smart card reader/writer combines the longer read range of proximity with the power and heightened security of smart card technology. Supporting read/write applications, the RW300 reads/writes user data to HID iCLASS credentials that offer either 2Kbits (256Bytes) or 16Kbits (2KBytes) of data storage. Read/write applications include IT secure authentication, biometric template storage, digital cash, time and attendance, equipment/material use or checkout and transit passes. Featuring crisp architectural styling, the reader/writer has an elegantly curved faceplate. The high intensity, three-color light bar provides clear, visual feedback even in direct sunlight. electable, distinct tone sequences indicate status conditions.

Experience Enhanced Versatility:

Use one reader to read standard proximity format data from HID iCLASS credentials, or unique serial numbers from MIFARE cards. Confidently install the reader knowing that the Wiegand output easily interfaces with most existing Wiegand protocol access control panels. To support read/write applications, the bi-directional RS232 serial port provides connection to a PC or microcontroller.

Appreciate Advanced Security:

All RF data transmission between the card and reader is encrypted using a secure algorithm. By using industry-standard encryption techniques and advanced key management systems, iCLASS reduces the risk of compromised data or duplicated cards.

Be secure in knowing:

iCLASS complies with the ISO 15693 standard for contactless smart card technology. Standards are important in smart card technology because they make it possible for many equipment and application developers to work with the smart card technology and create a broader range of uses for the card. iCLASS technology can extend the use of your access control credential into other applications today and tomorrow.


64-bit authentication keys are extremely secure. Readers and cards require matching keys to function. All RF data transmission between the card and reader is encrypted, using a secure algorithm. The key management system reduces the risk of compromised data or duplicated cards.


Key management is made easy! All cards are shipped with unique diversified keys, and readers are shipped with compatible keys. All keys are derived from the HID Standard transport key. While cards and readers with Standard keys are interchageable, the keys are highly secure, and cards can be made unique by ordering with iCLASS Elite formatting. Cards and readers with site-specific Custom keys are also optionally available from the factory, or the iCLASS CP400 programmer can be used to create site-specific keys and a reader configuration card, allowing the user to re-key cards and readers on-site. The programmer also enables users to protect card data with DES or triple DES encryption. Custom keys provide the highest level of security, where cards and readers are uniquely matched to individual sites or customers, and are non-interchangeable.

Easily Interfaced:

The readeris Wiegand output easily interfaces with most existing Wiegand protocol access control panels. The reader reads standard proximity format data from HID iCLASS cards, and will output data as encoded. Bi-directional RS232 serial port communicates at data rates up to 57.6 Kbaud, using ISO 7816-4 protocol, the standard for contact smart card applications, allowing connection to a PC or microcontroller. A Software Developers Kit is available. When reading MIFAREA cards, the reader can be configured to output 26-bit, 32-bit, 34-bit or 40-bit Wiegand formats based on the card serial number.

Card Compatibility:

The iCLASS RW300 reader is compatible with all iCLASS credentials. The readeris versatility allows it to read credentials meeting several ISO standards: o 15693 - read/write; 2Kbits (256Bytes) and 16Kbits (2KBytes) iCLASS credentials o 14443A - read only; MIFAREA (serial number)

Audiovisual Indication:

Audio transducer provides various tone sequences to signify access granted, access denied, power up and diagnostics. Visually impaired cardholders can easily distinguish between access granted and access denied. High-intensity light bar provides a clear visual status indication in red, green or amber, even in bright sunlight.

Open Collector Output:

Normally Open logic output, controlled via RS232 port. Switches up to 50 mA at 12 VDC. Use interposing relay for larger loads.


A three-part reader makes installation easier! Mounting plate attaches to EU/Asian back box, 52-60 mm screw hole spacing (vertical or horizontal), or to any flat surface. Reader body snaps onto mounting plate. Cover snaps over reader body, secured with a screw. Mounts on metal with minimal read range impact.

Indoor/Outdoor Design:

Rugged, weatherized polycarbonate enclosure, designed to withstand harsh environments, provides reliable performance and resistance to vandalism. Permanent magnet built into housing facilitates tamper alarm when used with a magnetic reed switch.s


Warranted against defects in materials and workmanship for life. (See complete warranty policy for details.)

Part Numbers:

Base Part Number: 6111


Color - Black, Gray, White
Key Management - Standard or Custom
Selectable Output Type (for MIFARE cards)
Standard Termination - 18" (.5 m) cable pigtail
Programmable LED/Beeper operation
Accessory - Security Tool; 04-0001-03

Copyright © 2011. A&D Security Systems Limited. All Rights Reserved.